|
DIMENSIONAL DATA IN INCHES (MILLIMETERS)
DIMENSIONS
FOR ACTUAL PART NUMBER AND BORE SIZES CLICK ON THE RED BUTTONS LEFT OF THIS PAGE
Intended Use: Double acting applications -Piston:Ductile iron
-Gland:Ductile iron, drilled oil passages
-Tube:Skived and roller burnished, precision finished steel for extended seal life
-Rod:Hard chrome plated
-End Mounts:Ductile iron female clevises with pins and clips included
-Tube Seals:Burn O Ring
-Rod Seal:Deep polypak with B lip design
-Rod Wiper:Urethane snap in
-Piston Seal:Hallite 755 provides prolonged wear resistance
-All Seals: Manufactured to US specifications
-Paint: Red, unless otherwise indicate. Custom colors are available
-Packing:Individually poly bagged
|
BORE | A* | B | C |
E | G | H | I |
J | M | P | Q |
R** | S | T | V | 2.000 (50.8) | 10.250 (260.4) | 0.1888 (63.5) | 3/8” NPT |
2.5000 (63.5) | 2.500 (63.5) | 1.125 (28.6) | 1.125 (54.0) |
2.125 (54.0) | 2.000 (63.5) | 0.350 (8.9) | 1 1/8”-12 UNF |
1.015 (25.8) | 1.000 (25.4) | 1.000 (25.4) |
2.960 (75.2) |
2.500 (63.5) | 10.250 (260.4) | 0.188 (4.78) |
3/8” NPT |
2.500 (63.5) | 2.500 (63.5) | 1.125 (28.6) | 1.125 (28.6) |
2.125 (54.0) | 2.000 (63.5) | 0.350 (8.9) | 1 1/8”-12 UNF |
1.015 (25.8) | 1.000 (25.4) | 1.000 (25.4) | 3.811 (96.8) |
3.000 (76.2) | 10.250 (260.4)* | 0.188 (4.78) |
1/2” NPT |
2.500 (63.5) | 27.17 (69.0) | 1.125 (28.06) | 1.125 (28.06) |
2.125 ( 54.0) | 2.000 (63.5) | 0.425 (10.8) | 1 1/4”-12 UNF |
1.015 (25.8) | 1.000 (25.4) | 1.125 (28.6) | 4.134 (105.0) |
3.500 (88.9) | 10.250 (260.4) | 0.188 (4.78) |
1/2” NPT |
2.500 (63.5) | 2.717 (69.0) | 1.125 (28.6) | 1.125 (28.6) |
2.125 (54.0) | 2.000 (63.5) | 0.425 (10.8) | 1 1/4”-12 UNF |
1.015 (25.8) | 1.125 (28.6) | 1.125 (28.6) | 4.550 (115.6) |
4.000 (101.6) |
10.250 (260.4) |
0.219 (5.60) |
1/2” NPT |
2.756 (70.0) |
2.717 (69.0) |
1.125 (28.6) |
1.125 (28.6) |
2.125 (54.0) |
2.000 (63.5) |
0.500 (12.7) |
1 1/4”-12 UNF |
1.015 (25.8) |
1.125 (28.6) |
1.125 (28.6) |
5.086 (129.2) |
5.000 (127.0) |
12.250 (311.2) |
0.250 (6.35) |
1/2” NPT |
3.500 (88.9) |
2.625 (66.7) |
1.250 (31.8) |
1.250 (31.8) |
2.125 (54.0) |
2.250 (57.2) |
0.625 (15.9) |
1 1/4”-12 UNF |
1.015 (25.8) |
1.500 (38.1) |
1.250 (31.8) |
6.000 (152.4) |
* Retracted length is 12.250 (311.2) for 8.000 (203.2) stroke ASAE cylinders and 15.500 (393.7) for 16.000 (406.4)stroke ASAE cylinders **Pin hole diameter is 1.265 (32.1) for 16.000 (406.4) stroke ASAE cylinders ***1500 PSI on 5” bore
|
Ecommerce Shopping Cart Software by Miva
|